/en-tutor-prep-s3-science-metal-corrosion-reactivity-series/
/en-tutor-prep-s3-science-metal-corrosion-reactivity-series/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Science: Metal Corrosion and the Reactivity Series Tutor Prep Guide — Rusting Conditions, Prevention and Extraction Calculations

Junior Science: Metal Corrosion and the Reactivity Series Tutor Prep Guide — Rusting Conditions, Prevention and Extraction Calculations

  • 2026-11-16

Students can say that rusting needs water and oxygen, yet their experiment designs use one tube and one observation. This lesson turns rusting into three controlled tubes, turns the reactivity series into a ranking that displacement reactions can prove, and closes with a blast furnace calculation so that conservation of atoms becomes something students can check.

Objectives — Students can: (1) use the results of three test tubes to show that rusting needs both oxygen and water, and explain why salt water speeds it up; (2) use displacement reactions to rank a set of metals by reactivity; (3) calculate the mass of metal obtainable from an ore, apply a percentage yield, and state how the calculation shows atoms are conserved.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Oxidation and reduction What kind of reaction is iron combining with oxygen? Oxidation; iron loses electrons
Formulae and relative mass What is the relative formula mass of iron(III) oxide? 160
Control in experiments What is the minimum number of tubes to show a condition is needed? At least two, changing only one variable

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Opening judgement Ask whether rusting needs air alone Write an answer now, compare at the end
6-18 min Three controlled tubes Dry air, boiled water with an oil layer, and salt water; compare after seven days Write what each tube controls
18-32 min Reactivity and displacement Zinc in copper sulfate solution: observations and mass change Decide which metal is oxidised
32-46 min Extraction and yield From 160 grams of iron(III) oxide to iron, then apply a yield Run the same route on a second question
46-56 min Prevention and question types Classify four rust prevention methods by mechanism Design a prevention plan independently
56-60 min Exit check Collect two questions and mark at once Complete independently

03 Teaching script (read it out)

Scene 1: Rusting needs both conditions at once

The usual answer is that air alone causes rusting, so the second condition disappears. Three tubes settle it in one demonstration. Tube one holds a drying agent and is sealed: air but no water, no change after seven days. Tube two holds boiled distilled water with a layer of oil: water but no air, no change after seven days. Tube three holds salt water and rusts visibly within seven days. Set side by side, the only conclusion available is that oxygen and water must both be present. The salt water tube rusts fastest because salt water conducts, making electron transfer easier – not because it contains more oxygen. Put numbers on the observation: the salt water tube gains 0.42 grams in seven days while the plain water control gains 0.14 grams, a factor of three that students compute themselves. Then push one step further: rust is hydrated iron(III) oxide, so the product weighs more than the iron that was consumed, and 112 grams of iron becomes 160 grams of oxide, a gain of 48 grams or 42.9 percent.

Students restate: oxygen and water must both be present, and missing either one stops rusting.

Scene 2: The reactivity series is proved, not memorised

The series has one practical use: predicting whether one metal can push another out of its salt solution. Zinc placed in copper sulfate solution dissolves, copper deposits, and the blue colour fades, proving zinc is more reactive than copper. Attach a mass: 1.0 gram of zinc is 0.0153 moles, displacement is one for one, so 0.0153 moles of copper form, which is 0.971 grams. The red solid weighs almost as much as the zinc that dissolved, and that number makes the reaction concrete. Rank potassium, sodium, calcium, magnesium, aluminium, zinc, iron, lead, copper, silver and gold, with hydrogen between lead and copper as the boundary for reaction with dilute acid. Flag two exceptions that exam questions use: sodium and potassium react violently with water first, so they are never used for displacement demonstrations; aluminium carries an oxide layer that slows the start until the surface is scratched.

Students say: the more reactive metal is oxidised and pushes the less reactive metal out of solution.

Scene 3: Extraction and yield: atoms first, yield last

The extraction method follows reactivity: very reactive aluminium is obtained by electrolysis, moderately reactive iron and zinc by reduction with carbon or carbon monoxide, and unreactive copper and gold occur native or come from displacement. Write the blast furnace equation: iron(III) oxide plus three carbon monoxide gives two iron plus three carbon dioxide. 160 grams of iron(III) oxide contains 112 grams of iron, which is the theoretical yield. Real plants lose material, so a question giving seventy percent yield produces 78.4 grams. Emphasise three habits: compute the theoretical value from the equation, apply yield only at the very end, and keep the unit asked for in the question. Finish with the rusting mass change as the mirror case: the same 112 grams of iron gains 48 grams when it becomes oxide, so a heavier product does not mean more iron.

Students restate: theoretical value from the equation first, yield multiplied at the end.

04 Question types and worked steps

Type Example Steps Answer
Experiment design Design an experiment to show rusting needs water Three tubes changing one variable each, with controls and a measured observation Drying agent, oil layer and salt water; compare mass change after seven days
Reactivity ranking Rank three metals using displacement reactions Try each pair, record reaction or no reaction A metal that displaces another is more reactive
Mass calculation How much copper can 1.0 gram of zinc displace? Moles, coefficient, molar mass 0.971 grams; copper is heavier per mole than zinc
Yield calculation Iron from 160 grams of ore at seventy percent yield Theoretical value first, then multiply by yield 112 grams theoretical, 78.4 grams actual
Sanity check (teach this): Sanity check: a rusted sample always weighs more than the iron consumed, so an answer reporting a decrease has swapped the molar mass of iron with the relative formula mass of the oxide; a displacement product may weigh less than the reactant metal even when the reaction goes to completion, because the molar masses differ, so always check moles before comparing masses; a yield result is always smaller than the theoretical value, and a larger one means the percentage was multiplied or divided wrongly; and the extraction method must match the position in the reactivity series, so reducing aluminium with carbon is self-contradictory.

05 Independent practice (3 questions)

Question Answer What to watch
Controls Which of the three tubes is the control, and why? Check that the definition of a control group is understood
Displacement Iron placed in copper sulfate solution: observations and equation Check for fading blue colour and red solid
Yield 250 grams of ore at eighty percent yield: mass of iron Check that the theoretical value comes first

06 Common mistakes and what to say

Mistake Student writes Say this
Only one condition Answering that iron rusts because it touches air Would it rust with air but no water? Look at tube one after a week.
Wrong reason for salt Saying salt water contains more oxygen Does salt water hold more oxygen than pure water? Think about what salt does to conduction.
Mass change reversed Writing that rusting makes the metal lighter because it is eaten away What has the iron turned into? Add the mass of oxygen that joined it.
Yield applied too early Multiplying the ore mass by the yield before using the equation That assumes the whole rock is iron oxide; the theoretical yield comes from the equation first.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Rusting conditions Oxygen and water together; salt water speeds it up A missing condition means repeating the three tubes of scene one
Use of the series Predicting whether a displacement reaction happens No stated use means repeating scene two
Yield Theoretical value first, yield multiplied last Wrong order means redoing the calculation of scene three

09 Tutor FAQ

Must the whole reactivity series be memorised?

Questions usually give five or six metals; knowing the ordering rule and the position of hydrogen is enough.

How is rusting different from burning?

Both are oxidation; burning is fast and releases heat visibly, rusting is slow and flameless, which is all the syllabus asks.

Can electrolytic extraction be skipped?

For aluminium only the idea of electrolysis is required; the calculation belongs to senior secondary.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →