/en-tutor-prep-s3-science-organic-chemistry-polymers/
/en-tutor-prep-s3-science-organic-chemistry-polymers/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Science | Organic Chemistry and Polymers Prep Guide (for tutors) | Hydrocarbons, polymerisation and plastic recycling

Junior Science | Organic Chemistry and Polymers Prep Guide (for tutors) | Hydrocarbons, polymerisation and plastic recycling

  • 2026-11-18

Students handle plastic every day, but ask what polyethene is made from, why a bag does not rot, or why burning plastic smells, and the room goes quiet. This lesson starts from the simplest hydrocarbon and counts all the way to degree of polymerisation and combustion products.

Objectives — By the end students can: (1) state that a hydrocarbon holds only carbon and hydrogen while an alcohol adds an OH group, and write formulas from names; (2) separate addition from condensation polymerisation, naming the ethene route to polyethene and the two-monomer route to nylon that loses water; (3) compute a degree of polymerisation from monomer and polymer relative molecular masses; (4) work out the carbon dioxide from burning one kilogram of polyethene using the carbon mass fraction, and give both sides of the recycling versus incineration trade-off.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Chemical formulas How is water written H2O, two hydrogens and one oxygen
Relative molecular mass What is the relative molecular mass of carbon dioxide 12 plus 32 gives 44
Conservation of mass Do atom counts change during burning No, atoms are only rearranged

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-8 minutes Object opener Hold up a plastic bag and a cotton cloth, ask how two polymers differ Write one difference, revisit at the end
8-20 minutes Hydrocarbons and alcohols Count from methane and ethene to ethanol with formulas and groups Write three formulas themselves
20-32 minutes Two kinds of polymerisation Show ethene addition, then a two-monomer condensation Draw the repeat unit and circle the lost molecule
32-42 minutes Degree of polymerisation Polyethene of 56000 with a monomer of 28 Work it out: 2000
42-54 minutes Combustion and recycling Carbon mass fraction to carbon dioxide, then the trade-off Find the carbon dioxide per kilogram
54-60 minutes Exit check Collect three items and mark them live Note which item they got wrong

03 Teaching script (read it out)

Scene 1: Hydrocarbons and alcohols: a carbon skeleton plus an OH

Narrow organic chemistry to two families first. Hydrocarbons hold only carbon and hydrogen, so methane CH4 and ethene C2H4 belong here; alcohols add an OH group to the chain, so ethanol is C2H5OH. Carbon always forms four bonds, so when a formula looks wrong, count the hydrogens first.The ethene and ethane pair matters most: ethane C2H6 is all single bonds, ethene C2H4 carries one double bond. That double bond is the entry ticket to polymerisation, and students should leave act one with that sentence.

Ask students to repeat: only a double bond allows addition polymerisation.

Scene 2: Addition and condensation polymerisation

Act two splits the two routes. Addition opens the double bond and links monomers with nothing thrown away, so the polyethene repeat unit is CH2CH2 and all 28 units of the ethene monomer survive. Condensation joins two different monomers and loses a small molecule, usually water; nylon comes from a diacid and a diamine, so its relative molecular mass must subtract the water lost.Fix it with numbers: the nylon repeat unit is 226 minus two waters of 36, giving 190. The commonest error is forgetting that subtraction and treating condensation as addition, so before every condensation question ask whether anything is thrown out.

Ask students to repeat: addition loses no atoms, condensation loses a small molecule.

Scene 3: Degree of polymerisation: total mass over monomer mass

Act three is degree of polymerisation. Polyethene of relative molecular mass 56000 with a monomer of 28 gives 2000, meaning two thousand repeat units in the chain. The method is one division, but remind students that the answer is a whole number, so 1999.7 signals that the question gave a rounded figure.Then link structure to properties: weak forces between chains make polyethene soft with a low melting point, while cross-linked polymers cannot be remelted, which is why thermosetting plastics behave differently. Keep it short, but require the causal sentence structure decides properties.

Ask students to repeat: degree of polymerisation is total mass divided by monomer mass.

Scene 4: Combustion products and the recycling trade-off

Act four is burning. Polyethene has the empirical formula CH2, so carbon is 24 over 28, which is 85.7 per cent. Burning one kilogram leaves 0.857 kilograms of carbon, and carbon dioxide is carbon times 44 over 12, about 3.14 kilograms. The same method gives 88 grams of carbon dioxide from 46 grams of ethanol.Then give the trade-off honestly: incineration recovers energy but releases carbon dioxide and other gases; mechanical recycling saves energy but needs sorting and shortens the polymer chain each cycle. The full answer is not recycling is always best, it is a comparison of sorting cost and end use.

Ask students to repeat: find the carbon mass first, then multiply by 44 over 12.

04 Question types and worked steps

Type Example Steps Answer
Formulas and functional groups Ethanol and ethene Count carbon, count hydrogen, then look for OH C2H5OH and C2H4
Addition or condensation Polyethene and nylon Ask whether a small molecule is lost Addition loses nothing, condensation does
Degree of polymerisation Relative molecular mass 56000, monomer 28 Total mass over monomer mass 2000
Combustion mass One kilogram of polyethene burned completely Carbon mass fraction times 44 over 12 About 3.14 kilograms of carbon dioxide
Sanity check (teach this): Reasonable-answer checks: a hydrocarbon holds only carbon and hydrogen, so any oxygen in the formula is wrong; ethene is C2H4, and six hydrogens means ethane was written; addition keeps the repeat unit mass equal to the monomer; condensation must subtract the small molecule, and skipping the water is the classic error; a degree of polymerisation is a whole number above one; carbon dioxide mass is always larger than the carbon it came from.

05 Independent practice (3 questions)

Question Answer What to watch
Degree of polymerisation Polypropene of relative molecular mass 84000 with monomer C3H6 Check the monomer is 42 first; the answer is 2000
Combustion product Carbon dioxide from 92 grams of ethanol burned completely Check the 44 over 46 ratio; the answer is 176 grams
Polymer type Classify polyethene, nylon and polyester Check each answer says whether a small molecule was lost

06 Common mistakes and what to say

Mistake Student writes Say this
Forgetting the water in condensation Writing that the nylon repeat unit is 226 Condensation loses water, so 226 minus 36 is the repeat unit.
Treating ethene as ethane Writing that ethene is C2H6 Ethene has one double bond, so it is C2H4 with two fewer hydrogens.
Rounding a degree of polymerisation Writing a degree of polymerisation of 1999.7 Repeat units are counted in whole numbers, so the question gave a rounded mass.
Claiming recycling has no cost Writing that recycling has no downside Recycling needs sorting and shortens the chain, so both sides belong in the answer.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Ethene formula C2H4 with one double bond Answering C2H6 means act one is repeated
Addition versus condensation Addition keeps atoms, condensation loses a small molecule A wrong answer means redoing the nylon mass calculation
Carbon dioxide from burning Carbon mass times 44 over 12 Failure to give the ratio means act four is repeated

09 Tutor FAQ

Must students learn functional groups beyond OH

Only hydrocarbons and alcohols are needed here; the test is recognising OH, and other groups wait for later years.

Should the degree of polymerisation formula be memorised

No formula name is needed, just the action of total mass divided by monomer mass.

How does this link to the reactions chapter

Combustion products need conservation of mass and balancing, so the two chapters work best together.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →