/en-tutor-prep-s4-biology-biological-molecules-food-tests/
/en-tutor-prep-s4-biology-biological-molecules-food-tests/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Biology | Biological Molecules and Food Tests Prep Guide (for tutors) | Reducing Sugar, Starch, Protein, Lipid

Biology | Biological Molecules and Food Tests Prep Guide (for tutors) | Reducing Sugar, Starch, Protein, Lipid

  • 2026-11-19

Students have done the practicals but cannot say why Benedict reagent needs a water bath or why iodine is added in two drops. They memorise a string of colours and then cannot say when orange turns brick red. This lesson splits each test into reagent, condition, positive colour and control, then uses numbers for semi-quantitative comparison.

Objectives — Students will be able to: (1) state the reagent, condition and positive colour for the reducing sugar, starch, protein and lipid tests; (2) compare concentrations using water-bath time or reagent volume and explain the limits of a semi-quantitative result; (3) use 17, 17 and 39 kilojoules per gram to calculate the energy in a meal and its share of a daily requirement; (4) explain the role of a negative and a positive control.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Water bath and temperature Why is Benedict reagent heated in an 80 degree water bath Even heating, so the colour judgement is reliable
Colour change What does blue turning brick red in Benedict reagent mean A reducing sugar such as glucose is present
Energy units How much energy does one gram of carbohydrate provide 17 kilojoules

02 Lesson flow (45 minutes)

Time Stage Tutor does Student does
0-6 min Diagnostic opener Ask how to prove a drink contains sugar Write a method, then compare with the four tests
6-20 min Four tests Demonstrate Benedict, iodine, Biuret and emulsion tests Fill a four-column table with reagent, condition, colour, control
20-30 min Semi-quantitative work Compare brick-red times for 0.1, 0.5 and 1 per cent solutions Calculate an unknown concentration from reagent volume
30-40 min Energy calculation Use 60 g carbohydrate, 20 g protein and 15 g lipid Calculate total energy and its share of the daily need
40-43 min Controls and error Discuss misjudgement without controls Write the role of negative and positive controls
43-45 min Exit check Mark two items on the spot, label reagent or colour errors Work independently

03 Teaching script (read it out)

Scene 1: Four tests in one four-column table: reagent, condition, positive colour, control

The reducing sugar test uses Benedict reagent: 2 cubic centimetres of sample with 2 cubic centimetres of reagent, heated in an 80 degree water bath for 5 minutes, giving a blue to green, yellow, orange then brick-red precipitate. The starch test uses iodine: two drops on the sample give a blue-black colour with starch, while glucose solution stays yellow-brown.Protein uses Biuret reagent: 2 cubic centimetres of sample with 2 cubic centimetres of reagent gives purple, while a distilled water control stays blue. Lipid uses the emulsion test: 2 cubic centimetres of sample with 2 cubic centimetres of ethanol, shaken, then 2 cubic centimetres of water, gives a milky white emulsion. Let students fill the table themselves rather than handing out notes, because the filling is the memorising.
Students do: complete a four-column table for all four tests, with reagent, condition, positive colour and control.
Students say: why iodine is used in two drops but Benedict reagent in equal volume.

Students restate: four tests, four columns; learn positive colours in pairs, not singly.

Scene 2: Semi-quantitative work: colour depth and volume needed

Colour only ranks, it does not measure. A 1 per cent reducing sugar solution turns brick red in about 1 minute, 0.5 per cent in about 2 minutes and 0.1 per cent in about 4 minutes, so at a fixed time a deeper colour means more reducing sugar. But sample colour, reagent batch and observer judgement all interfere, so answers should say “more” or “less”, never a concentration.Volume gives a firmer comparison. One cubic centimetre of 0.1 per cent DCPIP is decolourised by 0.2 cubic centimetres of 1 per cent ascorbic acid, which is 0.002 grams of vitamin C; if an unknown sample needs 0.4 cubic centimetres, its concentration is 0.002 over 0.4, which is 0.5 per cent. Use two controls: distilled water as a negative control that should not change colour, and a known 1 per cent solution as a positive control that should, so that any colour judgement has a reference.
Students do: from 0.2 cubic centimetres and 1 per cent, calculate 0.5 per cent for the 0.4 cubic centimetre sample, and state the role of both controls.
Students say: can a colour depth be written as “contains 2 per cent sugar”.

Students restate: semi-quantitative ranks only; always run both controls.

Scene 3: Energy calculations: three coefficients and one meal

Fix the three coefficients: carbohydrate 17 kilojoules per gram, protein 17, lipid 39. A meal with 60 g carbohydrate, 20 g protein and 15 g lipid gives 60 times 17, which is 1,020, plus 20 times 17, which is 340, plus 15 times 39, which is 585, so 1,945 kilojoules in total.Against a daily requirement of 8,000 kilojoules, the meal is 1,945 over 8,000, or 24.3 per cent. Lipid holds 39 over 17, or 2.29 times the energy of carbohydrate per gram, so raising lipid from 15 g to 25 g adds 10 times 39, which is 390 kilojoules, taking the total to 2,335. Draw the conclusion from students: whether a food is energy-dense depends on composition, not on weight.
Students do: calculate 1,945 kilojoules and 24.3 per cent, then the total of 2,335 kilojoules at 25 g lipid.
Students say: why two foods of the same 100 g weight can differ so much in energy.

Students restate: carbohydrate and protein 17, lipid 39; shares use division.

04 Question types and worked steps

Type Example Steps Answer
Reducing sugar test 2 cubic centimetres of glucose solution Equal volume of Benedict reagent, 80 degree water bath for 5 minutes Blue to brick-red precipitate
Starch test Two drops of potato juice Add two drops of iodine and observe Blue-black
Protein test 2 cubic centimetres of protein solution Add 2 cubic centimetres of Biuret reagent Purple; control stays blue
Energy calculation 60 g carbohydrate, 20 g protein, 15 g lipid Multiply each by its coefficient and add 1,945 kilojoules, 24.3 per cent of 8,000
Sanity check (teach this): Sanity checks: a positive Benedict result must start from blue, so “colourless to red” means a step was skipped; iodine detects starch only and will not turn brick red with reducing sugar, so the two reagents cannot be swapped; Biuret reagent is itself blue, so blue after adding it means negative rather than no reaction; the milky emulsion in the lipid test appears only after water is added, not with ethanol alone; in energy work the lipid coefficient 39 is always larger than 17 and the total must exceed the largest single item, so an answer below 1,020 means a multiplication error; a share of the daily requirement must be under 100 per cent, so 243 per cent means a decimal slip.

05 Independent practice (3 questions)

Question Answer What to watch
Vitamin C concentration 1 cubic centimetre of 0.1 per cent DCPIP decolourised by 0.6 cubic centimetres of sample 0.002 grams over 0.6 cubic centimetres About 0.33 per cent
Energy calculation 50 g carbohydrate, 30 g protein, 10 g lipid Multiply each by its coefficient and add 1,750 kilojoules, 21.9 per cent of 8,000
Control design To prove a drink contains protein Name a negative and a positive control Distilled water as negative, known protein solution as positive

06 Common mistakes and what to say

Mistake Student writes Say this
Longer heating means a stronger colour Writing “boil for ten minutes for a clearer colour” Five minutes is enough; longer heating turns even the negative control yellow, so the reference is lost.
Iodine used as a reducing sugar test Writing “iodine turning brick red means sugar” Iodine tests starch and turns blue-black; reducing sugar needs Benedict reagent with heat.
Treating semi-quantitative as quantitative Writing “the sample contains 2 per cent sugar” Colour ranks only; an accurate concentration needs a calibration curve or a volume method with known standards.
Energy coefficients mixed up Writing “protein gives 39 kilojoules per gram” Carbohydrate and protein are 17, lipid is 39; a wrong coefficient overstates the total.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Four tests Reagent, condition, positive colour, control A missing column means refilling the table
Semi-quantitative 0.5 per cent, with the limitation stated An exact concentration means repeating act two
Energy 1,945 kilojoules, 24.3 per cent Wrong coefficients mean two more items

09 Tutor FAQ

Why is no extra alkali added with Biuret reagent

Commercial Biuret reagent already contains alkali and copper ions, so 2 cubic centimetres as instructed is enough; if made up separately, add alkali first to make the solution alkaline and then copper sulphate, or no purple colour forms.

Why use a water bath instead of a flame

A water bath heats the reagent evenly and holds it near 80 degrees; a flame overheats locally and can decompose the reagent, so the colour cannot be judged.

Why is ethanol used before water in the lipid test

Lipid does not dissolve in water, but ethanol dissolves it; adding water then precipitates the lipid as an emulsion, whereas water alone simply forms layers.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →