S4 Chemistry Water Hardness and Treatment Practice 3 (Challenge)
- 2026-11-17
S4 Chemistry Water Hardness and Treatment Practice 3 (Challenge)
Ten items on volume-weighted mixing, percentage removed by boiling, lime softening, column capacity and fuel loss from boiler scale.
Mixed samples and engineering use Keep every step so a wrong answer shows whether the conversion or the ratio failed.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S4 Chemistry: water hardness and its treatment |
| Level | Challenge |
02 Questions (10 items)
- FoundationWhy does hard water form scale in hot water pipes but much less in cold ones?
- Foundation25.0 cm3 of a water sample needs 8.4 cm3 of 0.0125 M EDTA. What is the hardness as CaCO3 in ppm?
- Foundation100 cm3 of water of hardness 200 ppm is mixed with 300 cm3 of hardness 600 ppm. What is the hardness of the mixture?
- FoundationA sample has hardness 320 ppm before boiling and 180 ppm after. What percentage of the original hardness was removed?
- Intermediate1 dm3 of water contains 0.0030 mol of calcium hydrogencarbonate. How much Ca(OH)2 (molar mass 74 g/mol) is needed in theory to soften it?
- IntermediateAn ion exchange column has a capacity of 0.50 mol of Ca2+. How many dm3 of water of hardness 250 ppm can it treat in theory?
- ChallengeEvery 1 mm of boiler scale raises fuel use by 5%. By what percentage does fuel use rise with 4 mm of scale?
- Challenge500 dm3 of water of hardness 480 ppm contains how many grams of calcium and magnesium, expressed as CaCO3?
- Error redoSome people say distilled water is hard water because it is pure. What is wrong with that?
- Error redoSome people say temporary hard water softens simply on cooling. What is the correct treatment?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Heating decomposes calcium hydrogencarbonate into insoluble calcium carbonate that deposits on hot surfaces; at low temperature the decomposition is slow. | Scale formation depends directly on temperature. |
| 2 | 1.05 x 10^-4 mol / 0.0250 dm3 = 4.2 x 10^-3 mol/dm3; times 100 this is 0.42 g/dm3, that is 420 ppm. | Moles, concentration and CaCO3 mass in three steps, keeping the units consistent throughout. |
| 3 | (0.200 x 100 + 0.600 x 300) / 400 = 0.50 g/dm3, that is 500 ppm. | Hardness averages by volume, so 200 and 600 cannot simply be added. |
| 4 | (320 – 180) / 320 x 100 = 43.8%. | Use the hardness before boiling as the denominator and keep one decimal place. |
| 5 | 0.0030 x 74 = 0.222 g. | One mole of calcium hydrogencarbonate reacts with one mole of calcium hydroxide to give two moles of calcium carbonate. |
| 6 | 250 ppm is 0.25 g/dm3, which divided by 100 gives 0.0025 mol/dm3; 0.50 / 0.0025 = 200 dm3. | Convert ppm into mol/dm3 first and then divide the capacity by it. |
| 7 | 5 x 4 = 20%. | Scale conducts heat poorly, so the thicker it is the more fuel is wasted. |
| 8 | 0.48 g/dm3 x 500 dm3 = 240 g. | To turn ppm into g/dm3 just divide by 1000 and then multiply by the total volume. |
| 9 | Distilled water contains almost no calcium or magnesium ions, so it is soft; purity and hardness are different matters. | Hardness depends only on the calcium and magnesium content, not on how clean the water looks. |
| 10 | It must be boiled so that the calcium hydrogencarbonate decomposes into calcium carbonate precipitate; cooling alone removes no hardness. | This is a common mistake that confuses cooling with boiling. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



