S4 Geography River Hydrograph, Discharge and Lag Time Practice 1 (Basic)
- 2026-11-18
S4 Geography River Hydrograph, Discharge and Lag Time Practice 1 (Basic)
Ten items start from Q = A x v and lag time, covering rainfall volume conversions and the effect of urbanisation, with full working.
Discharge and lag time basics Separate cross-sectional area from velocity first, then handle mm, km2 and m3 conversions before judging lag time.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S4 Geography: river hydrograph, discharge and lag time |
| Level | Basic |
02 Questions (10 items)
- FoundationA river channel has a cross-sectional area of 20 m2 and a mean velocity of 0.8 m/s. Find the discharge.
- FoundationIn 30 seconds, 450 m3 of water passes a cross-section. Find the discharge.
- FoundationPeak rainfall occurs at 14:00 and the flood peak at 18:30. What is the lag time?
- FoundationDischarge is 24 m3/s through a cross-section of 15 m2. Find the mean velocity.
- IntermediateA 40 km2 catchment receives 50 mm of rain. What volume of water falls on it?
- IntermediateDischarge is 30 m3/s at a mean velocity of 1.5 m/s. Find the cross-sectional area.
- Challenge60 mm of rain falls in 3 hours. Find the mean rainfall intensity, and the volume on a 10 km2 catchment.
- ChallengeThe same storm falls on an urbanised catchment and a forested one. Which has the shorter lag time, and why?
- Error redoA student computed discharge as width 25 m times velocity 0.9 m/s, getting 22.5 m3/s. Mean depth is 2.0 m. Find the correct discharge.
- Error redoA student wrote that 30 mm of rain on a 20 km2 catchment is 30 m3 of water. Find the true volume.
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Q = A x v = 20 x 0.8 = 16 m3/s. | Discharge is cross-sectional area multiplied by mean velocity, in cubic metres per second. |
| 2 | Q = 450 / 30 = 15 m3/s. | Discharge is volume divided by time, whatever the shape of the section. |
| 3 | Lag time = 18:30 – 14:00 = 4.5 hours. | Lag time runs from the rainfall peak to the flood peak, not from the start of rain. |
| 4 | v = Q / A = 24 / 15 = 1.6 m/s. | Divide discharge by area to get mean velocity. |
| 5 | 40 km2 = 40 000 000 m2; volume = 0.050 x 40 000 000 = 2 000 000 m3. | Convert millimetres to metres and square kilometres to square metres before multiplying. |
| 6 | A = Q / v = 30 / 1.5 = 20 m2. | A faster flow needs a smaller section to carry the same discharge. |
| 7 | Intensity = 60 / 3 = 20 mm/h; volume = 0.060 x 10 000 000 = 600 000 m3. | Intensity is total rainfall over hours; volume is total rainfall in metres times area. |
| 8 | The urbanised one. Impervious surfaces cut infiltration, so water reaches the channel quickly through drains. | Vegetation and soil store water briefly, slowing its arrival at the channel. |
| 9 | Area = 25 x 2.0 = 50 m2; Q = 50 x 0.9 = 45 m3/s. Width alone is not the area. | Cross-sectional area is width times mean depth, never width alone. |
| 10 | 30 mm = 0.030 m; volume = 0.030 x 20 000 000 = 600 000 m3. The catchment area was left out. | Millimetres give depth only; volume needs depth times area. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



