/en-tutor-prep-s5-biology-population-sampling-quadrat-capture-recapture/
/en-tutor-prep-s5-biology-population-sampling-quadrat-capture-recapture/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Biology | Population Sampling and Estimation Prep Guide (for tutors) | Quadrats, Capture-Recapture, Growth

Biology | Population Sampling and Estimation Prep Guide (for tutors) | Quadrats, Capture-Recapture, Growth

  • 2026-11-19

Students can recite the capture-recapture formula but answer in “animals” rather than a unit, and cannot state why the estimate works. In the quadrat question they always forget to divide the mean by the quadrat area. This lesson joins sampling, recapture and growth with three sets of numbers, and every step must carry a unit and an assumption.

Objectives — Students will be able to: (1) calculate population density and total population from quadrat area and mean count, with units such as plants per square metre; (2) estimate population size from the capture-recapture proportion and state four assumptions: closed population, random mixing, marks retained, marks do not change catchability; (3) calculate exponential growth from doubling time and explain logistic growth and carrying capacity; (4) calculate annual change from birth and death rates.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Area and ratio What is the area of a 0.5 m by 0.5 m quadrat 0.25 square metres
Mean 70 plants in 20 quadrats, what is the mean per quadrat 3.5 plants
Percentage What percentage is 8 out of 50 16%

02 Lesson flow (45 minutes)

Time Stage Tutor does Student does
0-6 min Diagnostic opener Ask how to count the flowers in a meadow accurately Write a method, then compare three sampling methods
6-16 min Quadrat sampling Show a 0.25 square metre quadrat, 20 quadrats with 70 plants Calculate density and total population with units
16-26 min Capture-recapture Show 40 marked, 50 recaptured, 8 marked Use the proportion to estimate population and state two assumptions
26-36 min Population growth Use doubling time for bacteria from 100 to 102,400 Calculate a 2-hour run with 20-minute doubling
36-43 min Assumptions and error Discuss mark loss and migration State whether the estimate is too high or too low
43-45 min Exit check Mark two items on the spot, label formula or unit errors Work independently

03 Teaching script (read it out)

Scene 1: Quadrats: settle the area first, then the mean

A quadrat is a frame of known area; the shape does not matter but the area does. A square 0.5 m by 0.5 m has an area of 0.25 square metres. Twenty random quadrats in a meadow hold 70 plants, so the mean is 3.5 plants per quadrat.Density is the count per unit area, so divide the mean by the quadrat area: 3.5 over 0.25 gives 14 plants per square metre. Only then multiply by the whole area: 40 m by 30 m is 1,200 square metres, and 1,200 times 14 is 16,800 plants. Finish with the sampling fraction: 20 quadrats cover 5 square metres, and 5 over 1,200 is about 0.42 per cent.
Students do: from 70 and 20, calculate the mean 3.5, the density 14 per square metre and the total 16,800, with the sampling fraction 0.42 per cent.
Students say: why quadrats must not be placed where the flowers are densest.

Students restate: three quadrat steps – mean, divide by quadrat area, multiply by total area.

Scene 2: Capture-recapture: write the 16 per cent on both sides

Catch 40 animals, mark them and release them, then allow time for random mixing. The second sample of 50 contains 8 marked animals, so the marked proportion in the sample is 8 over 50, or 16 per cent. If mixing is random, the 40 marked animals are also 16 per cent of the population, so the population is 40 over 0.16, which is 250. In formula form it is marked times recaptured divided by marked in the second sample: 40 times 50 over 8.Show how sensitive the estimate is: with the same 40 marked and 50 recaptured, a recapture count of 10 gives 200, and a count of 5 gives 400. A small change in the recapture count moves the answer a long way, so answers should say “about” rather than an exact figure. Then state the four assumptions: a closed population with no migration, random mixing, marks that are not lost, and marks that do not change catchability. The two samples must also be close in time so that births and deaths do not intervene.
Students do: run the estimate three times with recapture counts of 8, 10 and 5, and justify which is most trustworthy.
Students say: if bright red paint is used, will the estimate be too high or too low.

Students restate: the two proportions are equal; a smaller recapture count gives a less stable estimate.

Scene 3: Population growth: doubling time and annual change

Exponential growth in the lab is best taught with doubling time. A hundred bacteria doubling every 30 minutes over 5 hours means 300 minutes, which is 10 doublings, so the count is 100 times 2 to the power 10, or 102,400, an increase of 1,024 times. Always match the time units first: over 2 hours with a 20-minute doubling there are 6 doublings, so 50 becomes 3,200.Field populations do not rise for ever because of carrying capacity. With a capacity of 5,000, growth is fastest around 2,500 and falls to zero near 5,000; this is logistic growth. A second method uses annual rates: with 40 births and 10 deaths per 1,000 each year, the net gain is 30 per 1,000, or 3 per cent, so 2,000 becomes 2,060 after a year. Keep the two apart: one is unlimited doubling, the other is limited net change.
Students do: calculate the number of doublings and the final count for 2 hours at 20-minute doubling, then the one-year change at 3 per cent.
Students say: why the lab curve and the field curve have different shapes.

Students restate: doubling uses powers of two; field growth needs a carrying capacity.

04 Question types and worked steps

Type Example Steps Answer
Quadrat density 20 quadrats of 0.25 square metres, 70 plants Mean first, then divide by quadrat area 14 plants per square metre
Total population Meadow of 1,200 square metres, density 14 Density times total area 16,800 plants
Capture-recapture 40 marked, 50 recaptured, 8 marked Marked times recaptured divided by marked in the second sample 250 animals
Doubling growth 100 cells, doubling every 30 minutes, 5 hours Total time over doubling time, then powers of two 10 doublings, 102,400 cells
Sanity check (teach this): Sanity checks: density must be larger than the mean per quadrat because a quadrat is smaller than one square metre, so a smaller density means the total area was used as the divisor; the total population must exceed the count inside the quadrats, so an answer below 70 is a multiplication error; marked animals in the second sample cannot exceed either the sample or the marked total, so 60 marked out of 50 means the data were copied wrongly; the estimate must exceed the number marked, so an answer below 40 means the formula is inverted; the number of doublings is a whole or half number, so 150 doublings in 5 hours means the time units were not matched; logistic growth never passes the carrying capacity.

05 Independent practice (3 questions)

Question Answer What to watch
Quadrat density 25 quadrats of 0.25 square metres hold 105 plants Check the mean and the division by quadrat area Mean 4.2, density 16.8 per square metre
Total population Area 800 square metres, density 16.8 Density times area 13,440 plants
Capture-recapture 60 marked, 40 recaptured, 6 marked Marked times recaptured over marked in sample, plus one assumption 400 animals; for example marks are not lost
Doubling growth 50 cells, doubling every 20 minutes, 2 hours 6 doublings 3,200 cells

06 Common mistakes and what to say

Mistake Student writes Say this
Density without dividing by quadrat area Writing “the density is 3.5 plants per quadrat” Density is per unit area: 3.5 over 0.25 is 14 plants per square metre, and the unit must be written.
Capture-recapture formula inverted Writing “population equals recaptured times marked divided by marked total” The left proportion is 8 over 50 and the right is 40 over N, so cross-multiplying gives 40 times 50 over 8, which is 250.
Assuming the formula is always accurate Writing “using the formula makes the estimate exact” Bright red marks raise catchability, so the recapture count is too high and the estimate too low; that is systematic error, not random error.
Doubling count with mismatched units Writing “5 hours is 150 doublings” Match units first: 5 hours is 300 minutes, and 300 over 30 is 10 doublings.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Density 14 per square metre, with units Missing units means two more items
Estimate 250 animals, with two assumptions No assumptions means repeating act two
Growth 10 doublings, 102,400 cells Wrong numbers mean extra doubling items

09 Tutor FAQ

Must a quadrat be square

Square and circular frames both work; what matters is a known, fixed area. Long thin quadrats suit narrow strips, but density is still divided by the quadrat area.

Can capture-recapture be used for plants

Yes, but plants do not move, so mixing means resampling at random rather than waiting; animals mix over time on their own.

Why not simply count what is caught

A catch depends on effort: one hour and five hours in the same meadow give different counts, so a proportion-based estimate is needed.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →