/en-tutor-prep-s5-chemistry-measurement-errors-significant-figures/
/en-tutor-prep-s5-chemistry-measurement-errors-significant-figures/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Secondary Chemistry (S5) | Measurement Errors and Significant Figures Tutor Prep Guide | Titration Data

Secondary Chemistry (S5) | Measurement Errors and Significant Figures Tutor Prep Guide | Titration Data

  • 2026-11-21

Students copy 24.10 cubic centimetres from the burette without knowing how far that value can be trusted, and cannot say why a mean keeps two decimal places. This lesson turns error into three things that can be written and calculated: uncertainty in a reading, rules for significant figures, and the difference between systematic and random error.

Objectives — Students can: (1) derive the absolute uncertainty and percentage error from two burette readings; (2) apply significant-figure rules for addition and for multiplication, and justify the number of digits kept; (3) separate systematic from random error and name one remedy for each.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Burette readings Start 0.50, end 24.60 cubic centimetres, volume used 24.10 cubic centimetres, estimated to 0.05
Percentages Express 0.10 over 24.10 as a percentage About 0.41 per cent
Significant figures How many significant figures in 0.0241 Three, leading zeros do not count

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min At the bench Hold a burette and ask how far the digit is trustworthy Record the value they would write and why
6-20 min Uncertainty Show how two readings of plus or minus 0.05 combine Obtain absolute and percentage uncertainty
20-34 min Significant figures Addition keeps decimals, multiplication keeps digits Round four calculations correctly
34-46 min Error types Classify four experimental situations Write one remedy for each type
46-55 min Propagation Show relative errors adding in a concentration calculation Obtain the total relative error
55-60 min Exit check Ask whether a mean may be written as 24.1 Answer using reading precision

03 Teaching script (read it out)

Scene 1: Readings first, errors second

Each small division on a burette is 0.1 cubic centimetres and the reading is estimated to 0.05. A start of 0.50 and an end of 24.60 give 24.10 cubic centimetres. Each reading carries plus or minus 0.05, so the difference carries plus or minus 0.10. Most students count the uncertainty once and forget the second reading.

Convert to a percentage to make comparisons meaningful: 0.10 over 24.10 gives about 0.41 per cent. The larger the titre, the smaller the relative error, which is why a 25 cubic centimetre titration beats a 5 cubic centimetre one.

Count both readings or the uncertainty is halved

Scene 2: Significant figures carry precision

For addition, keep the decimal place: 24.60 minus 0.50 gives 24.10 with two decimals because both readings are trustworthy only to 0.01. For multiplication, keep the number of significant figures of the least precise input: concentration equals moles over volume, so the answer cannot carry more digits than the weakest value.

Three titres of 24.10, 24.05, 24.15 average 24.10 with a spread of 0.10. Two decimals are legitimate because that is the reading precision, but 24.1000 is false precision. Write this on the board in red, since false precision is the most common lost mark.

Rules set the digits, not the calculator display

Scene 3: Two error types, two remedies

Systematic error pushes results consistently high or low, for example a late end point or a burette not rinsed with the solution; remedies are calibration, a blank run and checking the procedure. Random error scatters results, for example estimating the last digit or temperature drift; the remedy is repeated measurement and averaging.

Give four situations, let students classify them, then ask whether repeating three times fixes each one. It does not fix a systematic error, and saying so clearly prevents muddled later answers.

Repeats shrink random error but never shift systematic error

04 Question types and worked steps

Type Example Steps Answer
Uncertainty Start 0.50, end 24.60, each plus or minus 0.05 Add the uncertainty of both readings Plus or minus 0.10 cubic centimetres, about 0.41 per cent
Rounding 0.0241 times 2.5 over 24.10 Keep the fewest significant figures on multiplication Two significant figures in the result
Classification Burette not rinsed with the solution Check whether the shift has a consistent direction Systematic, results consistently high
Propagation Moles 1.0 per cent, volume 0.4 per cent Add relative errors when multiplying or dividing About 1.4 per cent in total
Sanity check (teach this): Sanity checks: absolute uncertainty is the sum of two reading uncertainties, so 0.05 alone is half the answer; percentage error must fall as the titre grows, the opposite direction means numerator and denominator are swapped; addition keeps decimals while multiplication keeps significant figures, and the two rules are not interchangeable; a systematic error has one direction, scatter means random; a mean cannot carry more digits than the readings, so 24.1000 is false precision; percentage error uses the accepted value as denominator.

05 Independent practice (3 questions)

Question Answer What to watch
Uncertainty Another pair, 1.20 and 26.40 Check that both readings are counted
Rounding Three data sets to round Check that addition and multiplication rules are separated
Classification Four experimental situations Check that direction and remedy are both given

06 Common mistakes and what to say

Mistake Student writes Say this
One reading only Writing the uncertainty as plus or minus 0.05 Both readings carry error, so add them to plus or minus 0.10
False precision Reporting a mean of 24.1000 Readings are trustworthy to 0.01, extra digits are false precision and lose marks
Swapped rules Using significant figures for addition and decimals for multiplication Addition uses decimals, multiplication uses significant figures
Repeats fix everything Claiming three runs cure an indicator error A late end point is systematic and stays biased; change the indicator or run a blank

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Uncertainty Both readings added to plus or minus 0.10 Writing 0.05 means recalculating
Significant figures Decimals for addition, digits for multiplication No distinction means repeating the drill
Classification Systematic has direction, random scatters Confusion means reteaching the four cases

09 Tutor FAQ

Why record 0.01 when the uncertainty is 0.05

The smallest division is 0.1 cubic centimetres and the reading is estimated to half a division, so 0.05 is the realistic uncertainty while the recorded digit still shows the estimate.

How many decimals should a mean keep

Match the reading precision, usually two decimals. Averaging lowers random error but does not improve the instrument, so the mean cannot carry more digits than the readings.

When should error be quoted as a percentage

Percentages help when comparing measurements of different size. Within one experiment an absolute value is fine, provided the answer states which form is used.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →