S5 Physics Circular Motion Practice 2 (Advanced)
- 2026-11-18
S5 Physics Circular Motion Practice 2 (Advanced)
Ten items add centripetal force, the vertical circle, a conical pendulum and rpm conversion.
Where the centripetal force comes from Decide which real forces point to the centre, then write F = m v2 / r; add m g at the bottom, subtract it at the top.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Physics: circular motion |
| Level | Advanced |
02 Questions (10 items)
- FoundationA 0.20 kg ball moves at 3.0 m/s on a horizontal circle of radius 0.50 m. What is the tension?
- FoundationAn 800 kg car takes a flat bend of radius 50 m at 15 m/s. What centripetal force is needed?
- FoundationA coin sits 0.50 m from the axis of a turntable, friction coefficient 0.40. What is the greatest speed before it slips (g = 10 m/s2)?
- FoundationA 0.20 kg ball is at the lowest point of a vertical circle of radius 0.80 m at 4.0 m/s. What is the tension?
- IntermediateThe same ball is at the top of the circle still at 4.0 m/s. What is the tension?
- IntermediateFor a vertical circle of radius 0.80 m, what is the minimum speed at the top to stay on track?
- ChallengeA conical pendulum has a 1.0 m string making 30 degrees with the vertical. What are its period and the bob speed (g = 10 m/s2)?
- ChallengeA centrifuge spins at 3000 rpm with a tube 0.10 m from the axis. Find the angular velocity and the acceleration.
- Error redoError check: a 0.20 kg ball on a horizontal circle has 3.6 N of centripetal force. A student claims a 3.6 N outward centrifugal force balances it. Is that right?
- Error redoError check: 600 rpm at radius 0.20 m. A student used f = 600 in omega = 2 pi f and got 2.84 x 106 m/s2. What is correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | F = m v2 / r = 0.20 x 9.0 / 0.50 = 3.6 N. | On a horizontal circle the tension is the whole centripetal force. |
| 2 | F = 800 x 225 / 50 = 3600 N, supplied by road friction. | On a flat bend the friction is the centripetal force. |
| 3 | The limiting friction mu m g is the centripetal force: v = sqrt(mu g r) = 1.41 m/s. | Set mu m g equal to m v2 / r; the mass cancels. |
| 4 | T – m g = m v2 / r, so T = 4.0 + 2.0 = 6.0 N. | At the bottom the tension is up and the weight down; the net force points to the centre. |
| 5 | At the top T + m g = m v2 / r, so T = 4.0 – 2.0 = 2.0 N. | At the top both tension and weight point to the centre. |
| 6 | At the limit T = 0, so m g = m v2 / r and v = sqrt(g r) = 2.83 m/s. | Just staying on means gravity alone is the centripetal force. |
| 7 | r = L sin(theta) = 0.50 m, T = 2 pi sqrt(L cos(theta) / g) = 1.85 s, v = sqrt(g r tan(theta)) = 1.70 m/s. | The period depends on L cos(theta) only, not on the mass of the bob. |
| 8 | omega = 3000 x 2 pi / 60 = 314 rad/s, a = omega2 r = 9.87 x 103 m/s2, about 990 g. | Divide rpm by 60 to get turns per second, then multiply by 2 pi. |
| 9 | No. The net force is 3.6 N inward, so there is a centripetal acceleration; centrifugal force is only a pseudo-force in a rotating frame. | In an inertial frame there is no centrifugal force; the centripetal force is unbalanced. |
| 10 | f = 600 / 60 = 10 Hz, omega = 62.8 rad/s, a = omega2 r = 7.90 x 102 m/s2. | rpm is not Hz; dividing by 60 avoids an error of 3600 times. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



