S5 Physics Circular Motion Practice 4 (Retry)
- 2026-11-18
S5 Physics Circular Motion Practice 4 (Retry)
Ten items target the usual slips: units, radius against diameter, the source of the force and signs in the vertical circle.
Ten common circular-motion errors Ask what quantity it is, what its unit is and which real force points to the centre, then substitute.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Physics: circular motion |
| Level | Retry |
02 Questions (10 items)
- FoundationA circular motion has a period of 2.0 s. What is the angular velocity and its unit?
- FoundationA circle of diameter 3.0 m carries an object at 4.5 m/s. What is the centripetal acceleration?
- FoundationRadius 0.50 m with period 0.25 s: what is the speed?
- FoundationA 0.50 kg stone moves at 4.0 m/s on a horizontal circle of radius 1.0 m. Find the centripetal force and say what provides it.
- IntermediateA 0.20 kg ball moves at 6.0 m/s uniformly on a circle of radius 2.0 m. Find its kinetic energy and acceleration.
- IntermediateA shaft turns at 120 rpm. Find the frequency and the period.
- ChallengeA coin sits 0.40 m from the axis of a turntable, friction coefficient 0.30. At what speed does it begin to slip (g = 10 m/s2)?
- ChallengeA 0.50 kg ball is at the bottom of a vertical circle of radius 2.0 m at 6.0 m/s. What is the tension?
- Error redoIn uniform circular motion, what is the direction of the centripetal acceleration, and how does it relate to the velocity?
- Error redoA satellite orbits at twice the Earth radius from the centre (1.28 x 107 m). Find its acceleration (surface g = 10 m/s2, Earth radius 6.4 x 106 m).
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | omega = 2 pi / 2.0 = 3.14 rad/s; the unit is rad/s, not m/s. | rad/s and m/s are different quantities, and mixing them is a common loss of marks. |
| 2 | r = 1.5 m, so a = 4.5 squared / 1.5 = 13.5 m/s2. | Halve the diameter before substituting. |
| 3 | v = 2 pi r / T = 2 pi x 0.50 / 0.25 = 12.6 m/s. | The numerator 2 pi r is the circumference and the denominator is the period. |
| 4 | F = 0.50 x 16 / 1.0 = 8.0 N, provided by the string tension; the centripetal force is not an extra force. | Draw only the real forces and add the components pointing to the centre. |
| 5 | Kinetic energy = 3.6 J and stays constant; a = 36 / 2.0 = 18 m/s2 towards the centre. | In uniform circular motion the kinetic energy is constant but the acceleration is not zero. |
| 6 | f = 120 / 60 = 2.0 Hz and T = 0.50 s. | Divide rpm by 60 to get Hz. |
| 7 | mu m g = m v2 / r, so v = sqrt(0.30 x 10 x 0.40) = 1.10 m/s. | At the limit the friction has reached its maximum, mu m g. |
| 8 | T = m v2 / r + m g = 9.0 + 5.0 = 14 N. | At the bottom you add m g and at the top you subtract it. |
| 9 | It always points to the centre, perpendicular to the tangential velocity, so it changes direction but not speed. | Being perpendicular to the velocity is exactly why the speed stays the same. |
| 10 | g falls as 1 / r2, so doubling r quarters it: a = 10 / 4 = 2.5 m/s2, the same as GM / r2. | Inverse square: double the distance and the acceleration falls to a quarter. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



