S6 Chemistry Spectrophotometry and Chromatography Practice 1 (Basic)
- 2026-11-18
S6 Chemistry Spectrophotometry and Chromatography Practice 1 (Basic)
Ten items start from the Beer-Lambert law and Rf, covering transmittance conversion, dilution and the purpose of a blank, with full working.
Beer-Lambert law and Rf basics Separate absorbance from transmittance first, then substitute the three quantities and use Rf to locate spots.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S6 Chemistry: spectrophotometry and chromatography |
| Level | Basic |
02 Questions (10 items)
- FoundationA coloured solution of concentration 2.0×10^-4 mol dm-3 has epsilon = 1200 dm3 mol-1 cm-1 in a 1.0 cm cell. What is the absorbance?
- FoundationA solution transmits only 25.0% of the incident light. What is its absorbance?
- FoundationIn paper chromatography a spot moves 3.6 cm from the baseline while the solvent front moves 9.0 cm. What is Rf?
- FoundationWhy is a blank of pure solvent measured before using a colorimeter?
- IntermediateAbsorbance is 0.450 with epsilon = 1500 dm3 mol-1 cm-1 and a 1.0 cm cell. Find the concentration.
- Intermediate250 cm3 of that solution contains a solute of molar mass 160 g mol-1. What mass of solute, in mg, is present?
- Challenge10.0 cm3 of 2.0×10^-3 mol dm-3 solution is diluted to 100 cm3 and measured at epsilon = 1250 with l = 2.0 cm. Find the absorbance.
- ChallengeA standard of 1.5×10^-4 mol dm-3 reads 0.56 and an unknown reads 0.42 under the same conditions. Find the unknown concentration.
- Error redoOnly 10.0% of the incident light passes through a solution. What is its absorbance?
- Error redoA student measured the solvent front to the top edge of the paper at 12.0 cm although it actually reached 9.0 cm; the spot moved 3.6 cm. What went wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | A = epsilon x c x l = 1200 x 2.0×10^-4 x 1.0 = 0.24. | Multiply the three quantities directly; absorbance has no unit. |
| 2 | A = log10(100 / 25.0) = 0.602. | Lower transmittance gives higher absorbance; the two are linked logarithmically. |
| 3 | Rf = 3.6 / 9.0 = 0.40. | Always measure from the baseline; Rf must be below 1. |
| 4 | It sets the absorbance of the solvent and the cell itself to zero. | The blank holds solvent and reagents only, with no analyte. |
| 5 | c = A / (epsilon x l) = 0.450 / 1500 = 3.00×10^-4 mol dm-3. | Rearrange A = epsilon x c x l, dividing by epsilon and then by l. |
| 6 | n = 3.00×10^-4 x 0.250 = 7.50×10^-5 mol; m = 7.50×10^-5 x 160 = 0.0120 g = 12.0 mg. | Convert the volume to dm3 first, and change grams to mg only at the end. |
| 7 | c = 2.0×10^-3 x 10.0 / 100 = 2.0×10^-4; A = 1250 x 2.0×10^-4 x 2.0 = 0.500. | Work out the new concentration after dilution, then apply the Beer-Lambert law. |
| 8 | c = 1.5×10^-4 x 0.42 / 0.56 = 1.125×10^-4, about 1.1×10^-4 mol dm-3. | At one wavelength in one cell, concentration is proportional to absorbance. |
| 9 | A = log10(100 / 10.0) = 1.00. | A of 1 means nine tenths of the light is absorbed, not one tenth. |
| 10 | The front must be measured where the solvent stopped, 9.0 cm: Rf = 3.6 / 9.0 = 0.40, not 3.6 / 12.0 = 0.30. | Count only the distance the solvent actually travelled, never the paper length. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



